This space is open to all Polantis users: it allows them to sell or buy CAD and BIM objects.
The Polantis Marketplace, how does it work?
In the seller’s perspective, downloading one’s object on the platform and filling up useful information is necessary. The final step for the seller? Set his price considering what he would be willing to pay for this object, the amounts ranging from a few cents to several tens of euros.
The architects and engineers’ teams of Polantis do a systematic sorting of the objects put on sale by members of the community in order to guarantee the quality of the objects.
The evaluation criteria are the following: the aesthetic of the object, the good integration into a digital model, the practicality, the realism, the level of detail and, for the BIM objects, the « parameter ability ».
The seller gets 80% of the sum for each sold object, the remaining 20% belong to Polantis: they will be used to improve the service or modelling other objects for the Polantis Marketplace.
In the buyer’s perspective, the navigation is like on the classic website of Polantis (for the downloads of manufacturers’ objects which are completely free) but a price is given for the objects in the Marketplace.
Several objects that have been modelled for the needs of specific projects “sleep” in the software libraries of designers. Polantis thought of bringing them back to life likely to second-hand clothing websites such as videdressing.us or vented.co.uk.
Polantis therefore incites architecture agencies to sell their objects: that moulding modelled for the need of a renovation project could be used to save time to another agency for example…
You would like to access to the Marketplace Polantis for:
We suggest the following articles:
GEGGUS GmbH’s reputation of excellence
GEGGUS GmbH was established over 70 years ago and is specialized in the manufacturing of entrance matting systems with aluprofile (TOP CLEAN). Today GEGGUS GmbH manufactures a full range of products, for the interior as well as the exterior.
They offer a wide selection of finishing touches (ripped carpet, rubber mats, cassette brush, scraper bar), colours and accessories of 10/17/22/27 and 42mm height. Besides they offer custom-produced designs (special cutting and finishing for frames and mats) in order to respond to the demand of all designers. In addition they offer honeycomb rubber mats (Karo As, Domino), coarse haired rep mat (Master) and ripped carpet (Enter).
The company’s reputation of excellence is based on the high product quality and their constant research for customer satisfaction: GEGGUS GmbH proposes an outstanding cost effectiveness and short delivery time.
Custom-produced BIM objects
GEGGUS GmbH represents their excellent work through BIM objects. The company took the decision to offer their architects the full range of entrance matting systems in CAD and BIM formats (Revit format). Therefore GEGGUS GmbH called on Polantis whose team of architects and engineers knows how to meet the needs of the users of the BIM method.
Easy access to BIM objects
In order to access the available BIM objects of GEGGUS GmbH the architect proceeds on the manufacturer’s web site, product section (accessible here) and makes his joice among the products with the help of a filter. Once a product is selected the indication “demonstrate showpiece” appears and leads you to the product sheet.
If the product is digitally available the link “download” leads you directly to the product page on Polantis.com.
You will find all BIM objects of GEGGUS GmbH on Polantis.com by clicking here.
We suggest the following articles:
Don’t lose track of the end customer : « Miss Martin »
Simon Moreau started with an observation: his work – that is BIM at Bouygues Immobilier – is above all targeted towards customers. In the end, those who will benefit from BIM advantages are the future landlords of the accomodations issued by Bouygues Immobilier.
Bouygues Immobilier BIM Initiative
With this in mind, the poperty developer has chosen to set the goal of carrying out 100% of his projects with the BIM working method by 2020.
Reminder, a project « carried out with the BIM method » implied – at first – the use of the same digital mock-up for the designers and the property developers.
The 2 main objectives of the BIM approach are:
To design better
Bouygues Immobilier BIM initiative is based on three « distinct bricks » : The project designers – Architects and BET – conceive it with a choice of modeling BIM software (no software is imposed by Bouygues Immobilier), the bimsync exchange platform is proposed to every actors of the project and deal with the use of all the information gathered in the digital mock-up(s) by the property developer.
About the bimsync exchange platform: Bouygues Immobilier staff chose it among 4 solutions with similar properties. Simon Moreau decided to promote the adoption of the solution for everyone by proposing to 50 collaborators its testing and its upstream approval. Bimsync is at the core of the initiative as the architects and the then engineers are encouraged to register their digital mock-ups as soon as possible during the designing.
In order to collaborate effectively on the digital mock-up as well as to collect exploitable datas, Bouygues Immobilier has made available a charter opened to everyone, click here to access it .
At any time, Simon Moreau staff propose their changes to the designers and can monitor the progress of the project as well as its consistency with their expectations.
Bouygues Immobilier staff take particularly heed of 3 aspects of the design:
Topics to expand on are:
Delivering innovative commercial media
The land developer wants potential buyers to be able to have a look at their property. The digital mock-up is the ideal support to organize virtual reality tours.
However, going from a digital mock-up to an actual flat is a heavy workload. Today, Bouygues Immobilier staff is working on the « industrialisation » of this initiative.
What about BIM objects?
Industrials attending the conference asked Simon Moreau about the use of « luxury » BIM objects in his BIM initiative. The answer: geometry is interesting, for example to measure a product dimension, but not necessary. Too many details affect the project as they weigh down on the digital mock-up. However, what is important is that industrials set a clear and standardized information and define each term clearly (works on PPBIM standard have been discussed during the presentation).
What’s the purpose? Manufacturers working in the same industry should make comparable datas available to conceptors with one click in order to ease the prescribed product choice.
We suggest you to read these articles:
Tsaratsiry started with the presentation of Tsara Architectures. His architectural firm specialized in BIM is mainly commissioned for BIM design’s missions, BIM support and BIM management. He explained that since nearly 2 years now, Tsara Architectures has been working in collaboration with Francois Leclercq Architectes Agency, the agency where Clémence Eliard is working.
The presentation started by Francois Leclercq’s Nanterre University project. Tsaratsiry rapidly explained: « In the project, everyone is not using BIM yet « . This project was started traditionally in 2D in AutoCAD and was then continued in BIM because project owners tend to ask it more often, even if it is not compulsory.
When the question about the interest of BIM method for project contractors was asked, Clémence answered: « Private contractors have big interest asking for BIM because they can reuse the information to prepare the bills of quantities. » « Provided that they know how to use them of course » insisted Alexandre Poter (GIRPI Technical Director at Aliaxis).
« We have an increasing number of public tenders. High-Schools and Colleges are increasingly asking for BIM », declared Tsaratsiry. He adds: « 70% of the construction costs is concerning exploitation and exploitation is optimized in BIM ».
Situated in the Southwest of Paris with a significant road network as well as tramways and bus systems, the city-center was cut from the rest of the city by the forest. Clémence explained « The project’s main issue was to deal with the isolation of the city-center, a very disparate urban fabric. »
Clémence explained: « The aim was thus to recreate new connections with the city through the creation of a wide tree planted alley and a second planted alley which allowed the connection with the inner-city. The main advantage of the project was the creation of a wide square which will be vivid and will connect the two tramway stations.
Revit or Archicad?
When this question was asked, Tsaratsiry answered: « Revit is used because it is multidisciplinary. Archicad is interesting for architects but less interesting for other construction players. That is the reason why so many Revit poles of activity are created. »
This question was the occasion for Tsaratsiry to talk about a project of collective dwellings in Marseilles in collaboration with CARTA-Associés Agency and François Leclercq. « Everything is made with a digital model » he explained, « and the exchange of a digital model allows a better coordination ».
Building Information Modeling: Only for the largest companies?
« Tsara Architecture supports agencies working on projects large enough to imply working with BIM. But BIM is not excluded for smaller projects, it only requires more expertise« .
The BIM method: a methodology above all
According to Tsaratsiry, « BIM remains a working method. BIM manager is not a title, it is a role ». He added: « When we say BIM, we already talk about a project environment ».
At Tsara Architectures, the decision was made to create a charter and to have a quality control because « When you say conception it implies complete project management ».
Toward a BIM city?
The objective would be that one day, a whole city would be created in BIM. Tsara Architecture is working on a project with François Leclercq: the urban project of « Euroméditerranée » at Marseilles. The project managers and project owners with the support of the CSTB are creating a prototype of a multiscale BIM digital model for the Mediterranean urban design. Francois Leclercq Agency is in charge of the urban part of the project.
Thank you again Clémence and Tsaratsiry for your presentation!
We suggest the following articles:
The German and French Polantis offices are glad to welcome you at the biggest BIM exhibition in Germany: BIM World Munich.
This is a great opportunity for us to meet our German contacts and users to share about your needs and our projects. The Director of Operations for Germany, Holger Hahn, will be at your service.
The two-day conference with exhibition area will demonstrate the benefits and implementation of the digital processes, present essential software, technologies and best practices in BIM and outline the upcoming challenges for working with BIM.
BIM World Munich, 29 + 30 November 2016
Polantis: stand 8
More on Polantis.info:
Vmzinc, the specialist in innovative zinc solutions for building covering published its first fifty Rendering and BIM textures compatible with 100% of professional software used by architects and AEC professionals.
This first VMzinc BIM catalog is part of the company’s communication strategy and its group: Umicore – an international specialist in metals and materials technology. VMzinc is its international brand name of rolled zinc solutions for the building industry.
VMzinc manufactures a broad range of products for the building industry, including a full range of Titanium-Zinc products available as sheets, coils or as specially tailored systems. Their extensive range of products reflects their wealth of professional and practical experience. These products are designed to meet needs of various climates and standards worldwide.
The first 50 BIM objects for VMzinc were specially designed by Polantis so that they could seamlessly fit and integrate into any kind of building project. The product categories « Systems and and products for roofing » and « Systems and products for façades » were conceived first in order to reply for the increasing demand of architects, specifiers and other AEC professionals. The other product categories are already under production by Polantis’ expert architects and will be published during 2014.
VMzinc hopes to profit from the ongoing BIM revolution and make sure architects and specifiers in the UK and elsewhere in the world could employ their range of products easily into their projects. The VMzinc catalog joins hundreds of other CAD and BIM objects catalogs recently published by a many AEC manufacturers in anticipation for the extensive UK BIM reform that will be in full effect on the 1st of January 2016.
UPM the Finnish giant of wood for construction enters the BIM era with the publication of a first CAD and BIM objects catalog made available for Architects and other specifiers in the UK and the rest of the world online at polantis.com
The first products to be published are systems of wood panels for cladding. UPM chose to make them available in 16 different CAD, BIM and Rendering formats. The BIM components could be easily integrated into a 3D BIM model and enrich any project with an extended palette of colors and motives.
UPM is a frontrunner of the new forest industry. The company leads the integration of bio and forest industries into a new, sustainable and innovation-driven future. UPM is known to create value from renewable and recyclable materials.
UPM’s structure consists of the following business areas: UPM Biorefining, UPM Energy, UPM Raflatac, UPM Paper Asia, UPM Paper ENA (Europe and North America) and UPM Plywood.
In 2012, UPM’s sales exceed 10 billion euros. They are present in 65 countries and their production plants exist in 15 different countries. UPM employs over 22,000 people worldwide and their shares are listed on the NASDAQ OMX Helsinki stock exchange.
It’s likely you have a team of technical experts at the heart of your business. This team is probably made up of experienced engineers who design and process your products. The question is do they have the specific skills necessary to develop a professional CAD and BIM catalogue in house?
Most product and industrial engineers are well versed in PLM computer design but are not architects. None of them have previously worked in architectural firms or specified products in an architectural design. Only an architect can create a high quality, professional CAD and BIM catalogue because only an architect has the specific experience in BIM or CAD software and the understanding of the proper functioning of an architectural practice.
A professional CAD and BIM catalogue needs to make your objects available in as many formats as possible. In order to maximise your return on investment, architects and prescribers must be able to download and manipulate the 3D versions of your products in to the software they habitually use. Today there are four BIM software versions in use as well as dozens of CAD and rendering programs.
Converting objects between one BIM program and another is quite simply impossible (this despite the claims of IFC and IFD’s so called « interoperability »). Converting CAD objects from one format to another is possible(in most cases) but it can be tricky.
The upshot is, if you fail to produce your catalogue in the maximum number of formats (at least 10) you will be limiting your business to a very small number of architects and prescribers. (i.e only those who use the few programs your objects are available in)
CAD architectural programs, and to a greater extent BIM programs, are far removed from the programs used by your designers and engineers. They really are distant cousins and converting an object from PLM to CAD (for example from .igs format to .dwg format) will more often than not produce monstrously large files with too much detail, in the wrong scale and may contain sensitive information you don’t want out of your premisses.
Converting an object from a PLM format to a BIM format is simply impossible today. (.sat to .gsm for example) Even if you manage somehow to make a « geometrical conversion » of a PLM object into a BIM format (i.e – you manage to convert the 3D form from one software format to the other) – you will end up with a heavy « dummy » object that has none of the attributes and parameters necessary for a proper functioning in a BIM project environment.
If you want to create your CAD and BIM catalogue in house, you will need to think about acquiring a number of BIM and CAD software programs. Consult our cost analysis below for more detail.
Creating a 3D catalogue can be immensely time consuming without the aid of technologies specially adapted to the task. Even if you do manage to hire top notch architects, they will still have to spend time mastering the programs they’re not familiar with. Once they do, they will then have to learn how to create an object using this software. After all, these programs are designed for the purpose of architectural design, not creating objects for catalogues.
Your architects will need to learn how to ‘divert’ or ‘hack’ to properly create your objects. A lot of these programs come with a ‘catalogue object creation mode’ but its rare to find someone with the know how in this domaine because very few architects pass their time creating catalogue objects.
At the bottom of this article you’ll see how it will take two excellent architects 19 years to create 1000 catalogue objects in all the necessary formats – don’t underestimate the time it takes!
Creating a CAD and BIM catalogue is good, but getting it to the people who will use it is even better. If you have managed to create a professional catalogue you will now have thousands of files, some in 2D format, some in 3D, others in BIM. Some will be purely textures or ‘shaders’ that can cover polygonal surfaces etc. How do you intend to get all of this out to architects and prescribers? Remember, each uses a different software program and perhaps different methods within a program.
-If you wish to distribute these files online, you will need to think about a costly web upgrade for your site. Aside from the distribution you’ll have to think about costs associated with hosting and downloading these objects.
– If you’re thinking about sending your catalogue via email, how will you go about managing a group of files that might totalize 8Go and how will you ensure your mail isn’t flagged as spam? Do you have a good list of contacts when it comes to architects and designers?
-If you want to hand out copies of your catalogue at trade fairs and other events which is the best format? A QR code? A DVD? a USB key? All of these need to be properly designed and thought of.
Let’s imagine you produce a range of 1000 different products and you want to create a CAO/BIM catalogue
– You will need to find and hire the services of two experienced architects who are content to abandon their career in architecture in favor of designing catalogue objects (no mean feat!) Assuming you manage to negotiate a salary of £2500 for each per month, you’re looking at an annual cost of : £60,000
– You’ll need to buy software licenses for CAD and BIM for 2 desks + any other essential software (Adobe creative suite, pack office, etc) That’s 12 software packages X 2 at an average cost of £3700 per license = £88,800
– An architect who can master several CAD and BIM software is a rare thing. You will need to pay for training. It takes around 5 days to properly master each program at an acceptable level. On top of that each architect will need to learn how to use the object creation mode of each software package. A day’s training costs around £250. £250 X 5 days for each program X 10 programs = £12,500
– 2 workstations properly adapted to high level 3D creation = £5000
The time it takes to create a professional CAO/BIM catalogue will also have an impact on costs… There are about 230 working days in a year (52 weeks X 5 days a week less 30 days of vacations / sick leave / bank holidays etc)
The time it will take to train your two architects will end up at around 50 work days. Add to that around 30 days each to learn how to use the object creation mode in each program. So each architect will need 150 days of training in the first year.
A very good architect who is also an expert in CAD and BIM will create, on average, one complex object per day. In just one format. Remember, you need to create objects in 10 – 15 formats. So let’s imagine your architects are particularly efficient and they manage to produce all the formats for one object in 10 days. At the end of the first year you will have 30 finished objects for your catalogue.
So the first year’s cost: 60,000 + 88,000 + 12,500 + 5,000 = £165,500
That’s £5,500 per object
The second year will cost the architect’s salaries + the software updates. Let’s assume your architects produce around 50 complete objects in all of the required formates each year. You will be looking at a cost of about £2,600 per object.
It will take your firm around 19 years and cost you more than £2,6 million to create a professional CAD and BIM catalogue in house covering your range of 1000 objects. That’s with two architects. If you hire 4, you will of course halve the time and double the costs. If you hire 6 architects and a project manager, they could get the time down to around 3 years but that will cost you significantly more.
Creating a CAD and BIM catalogue in house at the cost of around £5000 per object probably isn’t a very good idea, especially when a cheaper, easier alternative exists.
Get a professional CAD and BIM objects manufacturer to work on your catalogue. A good service provider and an expert in CAD and BIM catalogue creation will:
If you have any questions, feel free to drop them in to our comments box
BIM or « Building Information Modeling » has so many definitions it is almost ridiculous. Some don’t even define BIM as « Building Information Modeling » but rather as « Building Information Model » or « Building Information Management ». Many organizations, software editors and individuals claim to be the « true inventors » or « true initiators » of BIM. Some insist they were the first to know about BIM and know best how to use it.
God forbid, if you seek the answer in Wikipedia, you’ll most probably regret it. It fails to explain this multi-faceted and vast concept and settles for a bland, general and vague definition of what BIM is.
Luckily, BIM is actually something quite simple to grasp if you’re an AEC manufacturer. Most existing BIM ‘explainers’ are directed at architects or at the clients of building projects. In this post however, I’m going to explain what BIM is from the AEC manufacturer’s point of view.
The easiest way to quickly grasp what BIM is, is to first understand what a BIM object is and then understand what this kind of object is good for, and the best way to understand it is:
A BIM object functions as a recipient
And here’s a picture of a glass of water to help you remember it:
The glass itself represents a 3D model or any other kind of what is commonly called « Geometry » which basically means a 2D or 3D shape of SOMETHING
The water inside it represents INFORMATION ABOUT THE SOMETHING
And as you can see, the « water » adopts the shape of the object it is contained in. That is it. Simply put, a BIM object is a 3D geometry that contains information about it’s essence.
Now, if you are an AEC manufacturer all you have to do is imagine one of your products instead of the glass of water shown above. Your product could obviously be described geometrically (i.e – modeled in 3D) and you could probably also say lots of things about that product of yours. Let’s imagine for the sake of the example that your product is an automatic door instead of that glass:
This door has a certain shape, a width, a length, a thickness and several parts – this is its GEOMETRY.
It probably comes in different sizes and proportions to fit different types of openings – this is PARAMETRICAL information.
It also has different materials, (wood, metal, rubber, trans-lucid or transparent glass, plastic etc.) It replies to some norms and standards and is classified under a certain reference or catalog number. It is also manufactured by someone (you) and you have a phone number and an address where you (or your sales / technical force) can be reached. All of this is essential information.
If this automatic door is a BIM object then all of this information (parametric or not) is simply INTEGRATED into the geometry of the 3D object.
You probably understand by now what all of this is good for. The ability to integrate information into a parametric 3D object is a great thing. It allows the architects and any other AEC professionals (quantity surveyors, engineers…) involved in the conception of a building – to conceive a building with hundreds of such intelligent « building blocks ». Each block is « self aware » of what it is and each interacts with all the other elements of said building. For example, this door integrates into a wall somewhere in the project. The wall itself contains information about its thickness, it’s function (supporting or just separation of spaces) insulation, the dimensions of its openings etc. The wall might be « sitting » on a concrete slab covered with tiles of a certain shape and color etc etc. All of these BIM components together make a BIM MODEL and this intelligent BIM model is the basis to what BIM is all about.
Because, as soon as you have a BIM model, you can do many things. First, YOU CAN EDIT it really easily. For example, if you have a staircase in between two concrete slabs and you decide that you want the room’s ceiling to be higher all you have to do is increase the distance between those two slabs of yours, the staircase will respond automatically as it « knows » that it is connecting two floors and the BIM object that is this staircase will add extra stairs to itself and an extra length of railing to go along with it.
Second, this magical BIM model can provide you with tons of useful information that YOU CAN QUERY with a few clicks. In most BIM software you can get a detailed listing or nomenclature about all of the components that make your building. Not only how many square meters or yards it has but also how many doors, windows, chairs, and lamps it contains. This of course is very helpful if you’re an architect or a client.
If you are the person in charge of the maintenance of the building that is going to be built you could easily know how many pots of painting you’d have to purchase and when to refurbish it etc. A good BIM model will ensure EASY MAINTENANCE.
a BIM model is good for many other things as well, an engineer could use the model to make sure there are NO CLASHES that could occur during construction (For example: Part of the underground parking is built where a city sewage pipe passes or an air conditioning tube that goes right through where an electric installation is supposed to be)
This, in sum is all you, as an AEC Manufacturer need to know about BIM. Building information modeling is just that – a method that allows the entire supply chain of a building to better communicate with each other and access information about the thing they build when they need it. It makes life easier on everyone from the architect to the client and it all starts with a little BIM object that you provide the architect. This little BIM object is by far your best salesman as it tells your story, it showcases your competence and you wealth of knowledge and ingenuity.
“Now regard this pure white sheet of paper! It is ready for recording the logic of the plan. T-square, triangle, scale – seductive invitation lying upon the spotless surface. Temptation!
“Boy! Go tell Black Kelly to make a blaze there in the work-room fireplace! Ask Brown Sadie if it’s too late to have Baked Bermudas for supper! Then go ask your Mother – I shall hear her in here – To play something – Bach prefered, or Beethoven if she prefers.”
Now comes to brood – to suffer doubt, hesitate yet burn with eagerness. To test bearings and prove ground already assumed by putting all together in definite scale on paper. Preferably small scale study at first. then larger. Finally still larger scale detail studies of parts.”
Frank Lloyd Wright – An Autobiography – P. 156 – (Published – 1932)
Replace the T-Square, triangle and scale by CAD software, telemeter and a digital camera and you pretty much have the same methods today. Practicing architecture is all about proportions and scales, Architects start with an idea, a concept and they just keep on “zooming in” until the full picture comes to full effect in their imagination and of course, on their plans.
There are many methods, concepts, and “schools” to CREATE architecture, but what remains almost the same is that “coming and going” process; those constant cycles of analysis and synthesis. That, and the very final outcome: A universally readable drawing with strict rules – the execution plan.
Here are the most common phases of architectural work:
1. Getting and analyzing the program. After the contract between an architect and its client is established the architect takes the time to carefully study the program allocated. If it’s a public building, the program is usually crafted by specially trained architects and engineers providing a huge amount of norms, technical sheets and regulations to follow. In other cases, the architect builds the program along with his clients (for smaller projects usually, like private houses, cult facilities etc.)
2. First draft: 1/500 – 1/200 scale. Once the program is well defined and known to the designing team, the first drafting starts. Now methods vary: Some architects “attack” the 2D plans, sections and elevations that in due time will be transformed into the final execution plans and some start with 3D construction of volumes that will gradually become the spaces and shapes of the built project. In this very early stage, few architects turn to go over manufacturers catalogs.
3. First validation by client: 1/200 – 1/100 scale. This is where things start to “get hot”… The first validation of a project’s design is always a bit stressful for the designing team. This is where the architect needs to “re-seduce” the client in some sort. In most architecture practices, this is done with plain, traditional 2D plans sections and elevations and… lots of verbal explanations. Then there are those who are more “technique savvy” – In order to make sure the client properly understands the project they use computer generated imagery like this:
Over the past few years, we’ve been witnessing a genuine increase both in the performance of 3D CAD software and in the skill and talent of young architects. Computer generated imagery is becoming more and more abundant in today’s architectural design market. This is also partly due to the fact that clients tend to demand this kind of high-end service more frequently. Those images could be easily sent by email to friends and family for them to give their opinion.
4. Second client validation and construction permit: 1/100 – 1/50 scale. No architect dares to hope that his client will be 100% satisfied with his initial design. Often, there are many modifications and changes, but the path is clearer and the team is reassured once the concept has been accepted. Now is the time to get “down to business” The design team’s work now, is to get the project approved by the authorities for construction. In most western countries, the construction permit drawings are handed in 1/50 scale with an “in-site” integration of the building (CGI again…) Like the following example:
Although in the first client validation phase, CGI is not mandatory, most competent authorities demand one, so that they could make an idea of the project’s integration impact on its surrounding environment.
5. Execution plans: Detailed 1/50 scale and some parts in 1/20 or 1/10. Finally! The project was approved by both client and the authorities now comes the final part of architectural designing where “all hell breaks loose” – This is usually where our poor design team discovers that the plumbing doesn’t perfectly fit with the foundations and that the window they chose for the hallway is no longer manufactured because the draftsman used an outdated catalog from 1988… The plans are sent back and forth to the contractors and engineers for review and there is much rejoicing. It’s during this phase that most of the materials and architectural elements are specified. In some places, plans are not enough and architects actually write down – for every room and corridor – a full detailed textual description of all of the amounts and materials. At this point, the client tends to develop nostalgic feelings towards his initial budget and the days his local bank manager actually smiled at him…
6. Construction. Oh dear, now we actually have to build all that??
IMPORTANT NOTE: These 6 phases are generalized. There are lots of variations. The process I described fits the description of building for a private client. Building for governmental or other institutions is somewhat different than the described above. I’ll be happy to detail it in the comments or future posts if there’ll be a demand.
Where do YOU come in?
Well, it depends on what you are manufacturing:
Usually, architects work on several projects at the same time, and their phases do not overlap, how can you make sure you are reaching the designing team at the appropriate moment? Who should be your contact person? How do you find him or her? – All that and much more – in the following chapters.