The project Qwartz
When Corina arrived at DGLa 11 years ago, she told us how she rapidly how rapidly she noticed that DGLa did not systematically use 3D.
Her first project at DGLa was about a submission of an application for a building permit for Qwartz shopping center. It was developed in 2D on Autocad, as most of the projects at that time. She added: «The projects were sent to the clients and to the engineering agencies by mail with complementary files to print them which made exchanges more complex and slowed them down. Then, files were sent (at least) in PDF format, but when I had the occasion, I started using Revit and invited my colleagues to do so.”
Qwartz was finally inaugurated 3 years ago. For its future extension, DGLa will have the mission of BIM management.
Slow and steady BIM wins the race!
Corina presented different projects on which she could work and highlighted the evolution of BIM method’s use at DGLa.
DGLa rapidly understood the importance of BIM and its role as a facilitator and enabler of exchanges. The agency progressively integrated BIM method to its working method to gain more efficiency and to better improve its communication.
Corina explains: “Two projects with similar characteristics were compared: one was developed on Autocad and the other on Revit. With Revit, one could end with similar results with a better coherence of documents, while diminishing by 50% the time needed for the project and with less people affected to the project.
Working with BIM method: a traineeship
Through the different BIM projects they worked on, DGLa teams had the opportunity to learn from their mistakes. Corina brought out that for instance, there are still a lot of work with the work site stages and that it is not always that simple to bring digital models as a monitoring and exchanges medium on the work site.
To her, before reaching efficiency, one needs to learn how to master modeling and its database, how to better communicate as well as how to coordinate widely the exchanges with the different actors of the project. Collaborative work is efficient if the tools used are appropriate.
She said: “The first project in BIM ordered in 2014 by one of our project management support (and inaugurated this year), was the second extension of the shopping center BAB2. It served as a crash test for the following ones. We could start from the digital model from the first extension, adopt a new organization scheme and move toward BIM level 2, which actually became our current standard”.
Corina then talked about the roof covering of a pedestrian street. A smaller project indeed but modeled by two of her colleagues with adaptive structures created from parametric volumes.
She explains to our guests that for this undergoing project, you need to remember that parametric modeling is also part of BIM. “It consists of filling the digital model with information from its components and to obtain database and a nomenclature coherent with the model.
It enables architects to anticipate the environmental, technic and economic constraints as well as better construct what they are modeling.
Corina explained: “On Revit, we often create detailed digital models and heavy files. It becomes more complicated when you export them in IFC format. Sometimes, it multiplies by two or three the size of the files and harms their interoperability.
In order to tackle this issue, Corina gives possible solutions to provide digital models for the CMMS (computer-assisted maintenance management system). To her, you can fill all the information in a 3D file with a link toward the URL address of the component’s product card or toward a more detailed version of the 3D model. A second option, when it is possible of course, would be to integrate the drawing of the details in 2D within the family category which would be visible only with the high level of details.
“If the families created for different BIM software follow the 3 levels of details of geometrical complexity (the data do not depend on that), it will help us.
Corina explains: “Once that the BIM is implemented, we are trying to be more efficient”. For instance, having created our own tools, detail banks, with 2D details components (adaptive and/or pre-informed) is time-saving which is substantial. She also added: “this year, DGLa created an intern collaborative platform which will allow a better communication with the different collaborators and stakeholders (the project management support, the engineering agencies and consultants, etc.). The aim is to provide digital implementation files, to submit BIM building permits and to produce more virtual reality simulations. But project management support is still afraid of that.”
What about the implementation of BIM level 3?
“The level 2? Yes! But with the level 3, it is more complicated » she explains. At this moment of the presentation, our guests talked about the different issues at stakes when it comes to BIM level 3 implementation: intellectual property, responsibility, regulations…
The main result of this debate was the desire that we will see improvement with regard to this issue so that everyone could beneficiate from all the advantages of the BIM level 3. Corina insisted on the fact that different organizations were working on this subject to provide a better framework (Mediaconstruct, the MAF, etc.). It is to be monitored very closely!
We recommend you the following articles:
On May 18th, manufacturers and professionals of the construction world were welcomed by Polantis to attend a presentation conducted by Rafael Garcia – Architect and BIM Manager at Valero GADAN Architects.
« Les Mésanges » project
Rafael started his presentation by the project « Les Mésanges » – 150 collective buildings at Sceaux – which is under construction and should be delivered for 2019. He explains: “It was the first BIM project of France Habitation”.
This contest launched in September 2015 let only 3 months to its candidates to deliver their project. It is a really small period of time when taking into account the heavy workload that it implies. He adds: “In VGA (VALERO GADAN Architects), a team was specifically dedicated to the BIM method because it was impossible to work on the concept and with the data at the same time for a contest”.
Using BIM method during contests: Relevant or not?
Rafael immediately raised the issue of the workload implied by BIM method and talked about the relevance of its use during contests. He shared with the guests the different difficulties they faced, particularly when it comes to matrix and parameters. “There are more than 117 parameters to comply with on more than 5000 objects which are a lot for a contest » he said. He added: « using BIM method for contests? Yes. But at what cost? »
Answer: « You need to find a balance. Some technical requirements were too important and a simplification would have been needed”. Indeed, “BIM Tech had created a technical specification, a digital model in IFC format, a BIM catalog and a BIM matrix which were given to the participants to for the contest” and it represents a significant time investment. According to Rafael, BIM method is “a time investment at the beginning for sure, especially during the development phase but it represents also a time-saving tool for the future”.
It is consequently detrimental for construction managers not taking into account this investment. The fact that this kind of demand is not upgraded in terms of mission and fees is detrimental as well.
What about the challenges and uses of BIM method?
« Architecture must prevail over any software but BIM is still a tool allowing the pooling of resources and it enables collaborative work. However, the actors are not all aware of the limits and uses of the BIM method”. Rafael explains that using BIM in a contest requires a lot of work and he adds: “we were not expecting that but we learned a lot”.
An actual problem mentioned by Rafael is the lack of codification for some BIM objects. Otto Kus – BIM Manager and Architect – explains that to solve this problem “VGA tried to create tools to optimize some working process which remained slow and repetitive”. They thus created a coding scheme and took British protocols to create a dictionary. The creation of categories is a good thing. However, the question of the difficulty to reuse them in the future and of the quantity of information they contained led to a debate.
The future of BIM method: the importance of informing, investing and innovating now.
Rafael insists: « There is a need to train BIM actors to use BIM’s software and process as well as invest and innovate”. He invited our guests to ask themselves “how to save time by developing their own tools ». It led to a debate allowing everyone to give their opinion and to share their own experiences.
For VGA, the answer is simple: invest and innovate for the future of BIM method should be based on insight training to inform the different project stakeholders. There is also a need to raise awareness among the different actors including the project managers. It would consist of raising awareness about the objectives and the upgrading of the missions.
This morning was rich in debates and allowed our guests to ask a lot of questions. A great thank to Rafael Garcia and Otto Kus for this enriching presentation.
We suggest the following articles:
On the 20th of April, manufacturers and professionals of the construction world were welcomed by Polantis to attend a presentation conducted by Arnaud Désirée – Architect DPLG and BIM consultant at MONOKROM-ARCHITECTES.
Following our guest’s requests, Arnaud Désirée shared his own vision of the BIM method and of its definition. Arnaud revolved its answers around the ideas of BIM advantages. To him, the possibility offered by BIM method is pre-eminently the ability to modify digital models if needed. Not only does it allow its user to rectify a digital model but it also optimizes information exchanges.
Arnaud also insisted on the collaborative aspect of BIM method allowing professionals to work in real time on projects during the conception phase level as well as during the execution phase. Being able to work in real time “reduces the segmentation during a project workflow”. It is a phenomenon in which “everyone is an actor, there are not only architects or project owners”. He added that on a construction site, it is more and more important to get a 3D visibility since it allows to communicate more concretely.
Nice Méridia project by laisné roussel
This office building project with terraces will see the light of day in 2018 in the technology hub of Nice Méridia. Conceived on 8 parallel levels open to the sky, this building brings a visual continuity between the interior and the outside: thanks to the numerous balconies, terraces and to the punctual vegetalisation on the facades of the buildings.
Arnaud specifies: “at the beginning, this project was not supposed to be done in BIM method, it was a traditional 2-D project”. The initiative of doing it in BIM came from the rising number of projects and contests with BIM requirements.
Laisné Roussel has thus used the competencies of the BIM manager Arnaud Désirée to train Marie-Aglaé Boukouvalas, Project manager for Nice Méridia. He told us that Marie-Aglaé was really good at picking up with software and that she succeeded in mastering the software and the working methods in only 4 months which usually takes more time.
The BIM method? Yes. But at which level?
When questioned about the BIM level he used for his project, Arnaud explained that with the level 1 of BIM, you are typically in the design intent stage, in level 2 of BIM, you have to put the digital model on a collaborative platform, it is a coordination stage. When it comes to the level 3 of BIM, it is an integrative level of organization since everyone works in real-time on the digital model.
But who is choosing to work in level 2 or 3? “Contract awarders used to make compulsory the use of the level 2 or 3 of BIM, but it was proved that everyone is not equipped to reach level 3. Nowadays, the majority of the construction world actors works in level 2”.
What about the use of BIM objects?
After working on the design phase and after integrating the product categories to his project, an architect is dealing with technical aspects. Depending on its habits, he appreciates working with real references and real materials to have an optimal project adjustment. Arnaud explained that for a specific demand of furniture from his client, an architect can take an entire day to model a real object and gave us the example of a designer chair.
The deployment of BIM method
Professionals who do not use BIM lack usually of expertise. According to Arnaud Désirée: « the young generation learned to create via computing and the new generation is using BIM method instinctively. The elders are most of the time afraid of facing a loss of productivity because of the amount of time they will need to master BIM method and because of the investment needed to start using it”.
He added: “With BIM method, people need to work in team and communicate” and the companies are not necessarily ready for that. He highlights that big companies are starting to get into the move. Arnaud said that small companies specialized in interior design are only required to take a look at the digital model. For now, we are asking the less concerned actors to “know how to read and interpret a digital model”.
We recommend you the following articles:
Architect at work from « Catalogue modèle de l’architecte 1913 » (Paris, France)
According to our estimations, there are about 1.3 million active architects working in the building industry at any given time. Worldwide. You can safely double that figure if you want to include interior architects, decorators, office space planners, booth builders and other design related professionals. Those are key actors holding a “few” dozen billion dollar market.
Architects are decision makers. They are specifiers of building related goods as doctors prescribe medicine. And while pharmaceutical companies understood the later long time ago, most of the building related manufacturers didn’t seem to quite “get it” about architects. Yet.
The main reason behind that lack of comprehension is probably due to a profound misunderstanding of the architect’s work and role as a “prescriber of goods”. Here are, briefly, some points to take into account:
So how can you overcome all those points and how can you make sure you understand the relevant needs and related technology? In the upcoming posts, it will provide you with a complete overview, set of rules and guidance so you could start working and selling to architects in no time. Stay tuned.